The UM232R module is a USB - Serial DIP module providing access to all DBUS and CBUS pins of the FT232R. 

To learn more about the UM232R, click here.

The UM245R module is a USB - FIFO DIP module providing access to all DBUS and CBUS pins of the FT245R. 

To learn more about the UM245R, click here.

The DLP-2232M-G is a low cost integrated module featuring FTDI's FT2232D 3rd generation Dual USB UART/FIFO.  Ideal for rapid prototyping and development of FT2232D designs, an attractive quantity discount structure also makes this module suitable for incorporation into low/medium volume finished product designs.

Despite its low cost, the DLP-2232M-G not only offers the advanced features of FTDI's 3rd generation device but has a quality 4-layer PCB design with solid power and ground planes and an integral 93C56 EEPROM on board for easy OEM customisation.  Integral power control and an on-board MOSFET power switch make the DLP-2232M-G ideal for USB high bus power USB bus designs as well as self powered and low powered products.

The DLP-2232M-G plugs into a standard 40-pin 0.6in wide DIP socket and is lead-free.

To download the DLP-2232M-G data sheet, click here.

The DLP-2232M-G is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-USB232M-G is a low cost integrated module featuring FTDI's FT232BL 2nd generation USB UART.  Ideal for rapid prototyping and development of FT232BL designs, an attractive quantity discount structure also makes this module suitable for incorporation into low/medium volume finished product designs.

Despite its low cost, the DLP-USB232M-G not only offers the advanced features of FTDI's 2nd generation device but has a quality 4-layer PCB design with solid power and ground planes and an integral 93C46 EEPROM on-board for easy OEM customisation.

The DLP-USB232M-G plugs into a standard 24-pin 0.6in wide DIP socket.

To download the DLP-USB232M-G data sheet, click here.

The DLP-USB232M-G is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-USB245M-G is a low cost integrated module featuring FTDI's FT245BL 2nd generation USB FIFO.  Ideal for rapid prototyping and development of FT245BL designs, an attractive quantity discount structure also makes this module suitable for incorporation into low/medium volume finished product designs.

Despite its low cost, the DLP-USB245M-G not only offers the advanced features of FTDI's 2nd generation device but has a quality 4-layer PCB design with solid power and ground planes and an integral 93C46 EEPROM on-board for easy OEM customisation.

The DLP-USB245M-G plugs into a standard 24-pin 0.6in wide DIP socket.

To download the DLP-USB245M-G data sheet, click here.

The DLP-USB245M-G is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-2232ML is a low profile version of the DLP-2232M.   As with the DLP-2232M, all the external components required for the FT2232C are mounted on the PCB including a 93C56 EEPROM for easy OEM customisation.

To download the DLP-2232ML data sheet, click here.

The DLP-2232ML is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-2232PB-G is a powerful integrated module featuring FTDI's FT2232L 3rd generation Dual USB UART/FIFO together with a PIC 16F877 MPU.  Unlike the FT245BM based DLP-245PB, the DLP-2232PB-G allows reprogramming of the 16F877 over USB without the need for a separate flash programmer.

The DLP-2232PB-G is supplied pre-programmed with "Token I/O" code in the 16F877's ROM for basic port pin input/output capability (see data sheet for details).

The DLP-2232PB-G plugs into two 25 way SIL header strips (supplied).

To download the DLP-2232PB-G data sheet, click here.

The DLP-2232PB-G is now available in a specially priced bundle with a CCS C compiler.  The compiler allows the user to modify the DLP-2232PB-G firmware with a limited version of the same compiler used to develop the original code.  This limited IDE compiler supports the PIC16F876/876A and PIC877/877A devices. The compiler includes 30-days of download rights for the most up-to-date version after registration.  This bundle represents a rare opportunity for both seasoned and aspiring microcontroller developers to hit the ground running with all the tools they’ll need to edit, compile, and upload custom firmware to the PIC 16F877A microcontroller.

The DLP-2232PB-G is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-245PA is an integrated module featuring FTDI's FT245BM 2nd generation USB FIFO together with a PIC 16F872 MPU. It plugs into a standard 40-pin 0.6in wide DIP socket. It is ideal for rapid prototyping and development of FT245BM / PIC based designs or incorporation into low / medium volume finished product designs.

• 9 digital I/O lines (5 can be configured as A/D inputs) plus the 8-bit data bus available for interfacing to user electronics

• Microchip 16F872 processor with 2K FLASH ROM, 128 bytes RAM and a multi-channel 10-bit A/D converter

• "Token I/O" code pre-programmed into the 16F872's ROM for basic port pin input/output capability including access to the A/D, EEPROM and external digital temperature sensors

• USB 1.1 and USB 2.0 (Full Speed) compliant

• PIC 16F877 Flash ROM can be easily erased and reprogrammed if required using the optional DLP-FLASH Programmer

To download the DLP-245PA data sheet, click here.

The DLP-245PA is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-245PB-G, an updated version of the DLP-245PB, is a powerful integrated module featuring FTDI's FT245RL 4th generation USB FIFO together with a PIC 16F877A MPU.  It plugs into a standard 40-pin 0.6in wide DIP socket. It is ideal for rapid prototyping and development of FT245RL/PIC based designs or incorporation into low/medium volume finished product designs.

• Send/receive data over USB to a host computer at up to 2 megabits per second

• 18 digital I/O lines (6 can be configured as A/D inputs) plus the 8-bit data bus available for
  interfacing to user electronics

• Microchip 16F877A processor with 8K FLASH ROM, 368 bytes RAM and a multi-channel,
  10-bit A/D converter

• “Token I/O” code pre-programmed into the 16F877A’s ROM for basic port pin input/output
  capability including access to the A/D, EEPROM and external digital temperature sensors

• ROM can be easily erased and reprogrammed with a user-supplied compatible programmer

• No in-depth knowledge of USB is required as all USB protocol is handled automatically by the
  on-board FT245RL and its support circuitry

• USB 1.1 and USB 2.0 (Full Speed) compliant

To download the DLP-245PB-G data sheet, click here.

The DLP-245PB-G is now available in a specially priced bundle with a CCS C compiler.  The compiler allows the user to modify the DLP-245PB-G firmware with a limited version of the same compiler used to develop the original code.  The only limitations of this compiler version are the microcontrollers supported (16F876/876A/877/877A PIC microcontrollers) and 30-days of download rights after registration.  This bundle represents a rare opportunity for both seasoned and aspiring microcontroller developers to hit the ground running with all the tools they’ll need to edit, compile, and upload custom firmware to the PIC 16F877A microcontroller.

The DLP-245PB-G is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-245SX is a powerful integrated module featuring FTDI's FT245BM 2nd generation USB FIFO together with a Scenix (Ubicom) SX28 MPU.  It plugs into a standard 40-pin 0.6in wide DIP socket.  It is ideal for rapid prototyping and development of FT245BM/Scenix based designs or incorporation into low/medium volume finished product designs.

• 7 digital I/O lines plus the 8-bit data bus available for interfacing to user electronics

• 50MHz SX28 MPU with 2K FLASH ROM and 136 bytes RAM provides up to 7M bits per second data rate to host computer

• Example source code provided for "Token I/O" firmware feature

• USB 1.1 and USB2.0 (Full Speed) compliant

• SX28 Flash ROM can be easily erased and reprogrammed if required using the optional DLP-FLASH Programmer

To download the DLP-245SX data sheet, click here.

The DLP-245SX is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.

The DLP-245SY is a powerful integrated module featuring FTDI's FT245BM 2nd generation USB FIFO together with a Scenix (Ubicom) SX48 MPU.  It plugs into a standard 40-pin 0.6in wide DIP socket.  It is ideal for rapid prototyping and development of FT245BM/Scenix based designs or incorporation into low/medium volume finished product designs.

• 20 digital I/O lines plus the 8-bit data bus available for interfacing to user electronics

• 50MHz SX48 MPU with 2K FLASH ROM and 262 bytes RAM provides up to 7M bits per second data rate to host computer

• Example source code provided for "Token I/O" firmware feature

• USB 1.1 and USB2.0 (Full Speed) compliant

• SX48 Flash ROM can be easily erased and reprogrammed if required using the optional DLP-FLASH Programmer

To download the DLP-245SY data sheet, click here.

The DLP-245SY is available on-line from the FTDI Chip Shop, in the USA from DLP Design directly or worldwide through the FTDI Sales Network.